Jumperkit 18001.10-Kit (aka Adapter Kit)

A Jumperkit is a packaged set of electrical test leads used with multimeters and other test equipment for simplfying automotive electrical diagostics. The test leads in the jumperkit fit onto the pin and socket type connectors commonly found in automotive electrical connectors.

The kit consists of 34 different test leads plus 2 leads with male banana plugs and 2 adapter leads with male spade terminals on both ends.

Each test lead is terminated on both ends. One end of each test lead has a female spade connector. This end is used to connect to the banana lead or the adapter lead. The other end of each test lead has one of the commonly found automotive electrical pin and socket type connectors. Both male and femal leads are provided for each type of automotive electrical connector in the jumperkit.

These test leads make it simple to connect your multimeter or other test equipment to the pin or socket found in the most common automotive electrical connectors. Once connected, your hands are free! You don't have the frustrating job of trying to hold the test probe from your multimeter in place on the inside of the automotive electrical connector! Not only does this free up your hands, but it is much safer to use since the Jumperkit test lead is designed to fit the pin or socket and stays snuggly in place, and each Jumperkit test lead has shrink tube around it to protect it from shorting out against anything.